93-02 Camaro & Firebird. Standard tubular k-member with LT1 motor mounts. Red finish. For use with BMR manual rack-n-pinion.
Requires use of BMR 35-RK001 rack-n-pinion kit.
|
The LT1 design integrates
the driver side cast iron frame stand and the passenger side motor mount into
the k-member. These two items alone weigh 8 lbs. and are eliminated when
using our k-member. Total K-member weight including drivers frame stand and
passenger motor mount is 24.5 lbs.!
|
NOTE: Due to motor mount design, these K-members are not
compatible with shorty headers
BMR Tubular K-members are designed to provide
a lightweight alternative to the factory K-member as well as provide additional
clearance for aftermarket headers and turbo systems. Our unique design on our
V8 models feature integrated frame stands that replace the factory cast iron
frame stands. This additional weight reduction allows us to use larger diameter
tubing and thicker mounting plates for additional strength over the
competition. This means that you can use the K-member for street use, road
race, autocross, or drag strip use. BMR K-members are built exclusively using
larger diameter 1-5/8" x .120" and 1-1/4" x .095" tubing
yet still remain up to 7.5 lbs. lighter than the competitions due to our
integrated mount design. Using our tubular K-member and upper/lower a-arm set,
expect a minimum weight reduction of 42 lbs. Combine this with a coil-over
style spring/shock combo and a lightweight front brake setup and lose over 100
lbs. off the front end!